Decked Out / Projects - Electronics / Projects - Fabrication / Projects - Fitouts

Stacer Wildrider 619 Fitout

Stacer Wild Rider 619 Fitout

This few months old Stacer Wild Rider 619 came in for some work including a Lone Star anchor winch, partial rewire and a custom transom boarding ladder.

The standard wiring was cluttered with a fuse block in a hard to reach spot and the negative cable joined with screw in wire terminal blocks, both of which is not ideal for future expansion and user friendliness. The factory fitted fuse block and negative wire terminal blocks was removed, rewired and attached to a 12 way fuse block, mounted on a custom plate in conjunction with the anchor winch installation. The battery system was also wired up to one master switch with dual internal circuits, so both batteries remain on an independent circuit at all times for redundancy. Two Anderson plugs was fitted for charging batteries.

The owner found that the factory transom boarding ladder was also a little difficult to reach, with the first rung being a little high. We designed and fabricated an extended ladder with an extra rung, which doubles as a hand rail when boarding via jetties/pontoons etc.

  • Lone Star GX1 Anchor Winch
  • Electrical system designed for user friendliness and future expansion
  • Custom fabricated Transom Boarding Ladder